FreeSoft Labs All articles
Cost Analysis

The Scanner Was $25; the First 60 Days Cost $955: Three Free Document Vaults, Tested

FreeSoft Labs

The Fujitsu ScanSnap S1500 showed up at a Goodwill in Columbus, Ohio, for $25. No power brick. A sticky roller. A price tag that looked like it had been printed during the first Obama administration. We bought it anyway.

For the next 60 days, a 10-person property-management office in Dayton fed every invoice, lease, W-9, maintenance receipt, and sticky-note reimbursement claim through that scanner. Then we ran the same pile through three free document managers: Paperless-ngx, Docspell, and Mayan EDMS. This is the bill nobody puts on the whiteboard.

The Setup: One Scanner, Three Vaults, and a Cheap Mini PC

We used a $99 secondhand Lenovo M910q Tiny with 16GB of RAM and a 1TB SSD. Each document manager got its own Proxmox VM. The scanner connected over USB to a small fanless PC running SANE, then dumped PDFs into a watched folder. That part mattered: the S1500 is old enough that driver support is a scrapbook project, not a product page. Ours worked through SANE's epjitsu backend after a firmware nudge. Yours may not. Test before you buy.

Paperless-ngx went up fastest: Docker Compose, Postgres, Redis, and a media folder. Docspell took longer because it wants Postgres and Solr, and the JVM has opinions. Mayan EDMS was the heaviest lift: Postgres, Redis, more moving parts, and a cabinet-and-workflow model that assumes you want to design a records-management program before lunch.

How We Tested

We scanned 1,184 pages across 60 days. That included 612 invoices, 188 receipts, 74 lease pages, 126 W-9s and vendor forms, and 184 pieces of general office paper. We also built a 140-page benchmark set: 60 typed invoices, 40 crumpled receipts, 20 handwritten notes, and 20 lease pages with stamps and signatures. Every tool got the same files, the same OCR language setting, and the same cheap hardware.

OCR Accuracy: Typed Paper Is Easy; Receipts Are Where Dreams Die

Paperless-ngx led on typed invoices at 97% word accuracy, Docspell hit 95%, and Mayan EDMS came in at 93%. On receipts, the numbers fell hard: 74%, 69%, and 63%. Thermal paper, coffee rings, and faded ink are not a Tesseract fan club.

Handwriting was worse. Paperless managed 18% on handwritten notes, Docspell 11%, and Mayan 9%. A sticky note that says 'call plumber re: unit 4' is basically a captcha. If your office runs on ballpoint scribbles, do not expect free OCR to save you. Type the note or use a form.

Search Quality and Daily Use

We ran 120 retrieval queries against each system: vendor names, dollar amounts, lease dates, and phrases like 'water heater' and 'parking addendum.' Paperless-ngx found 112. Docspell found 104. Mayan found 98.

Paperless-ngx won because its search is boring and fast. Tags, correspondents, document types, and full text all show up in one place. The UI is plain, but a property manager can learn it in an afternoon. Docspell has a cleaner upload flow and a nicer look, but search felt slower on our box, and Solr reindexing is a chore you will eventually face. Mayan EDMS is powerful if you need workflows, cabinets, and retention rules. For a 10-person office that just wants to find a lease in 20 seconds, it is too much machinery.

Storage and Backup Pain

The same 1,184 pages consumed 2.3 GB in Paperless-ngx, 2.1 GB in Docspell, and 3.6 GB in Mayan EDMS. That is not a disk-space problem in 2026. It is a backup-complexity problem.

Paperless-ngx was the easiest to back up: a Postgres dump plus the media directory. Our test restore took 14 minutes. Docspell took 26 minutes because we had to protect the database, the file store, and the Solr index. If Solr is lost, you can reindex, but that is not how you want to spend a Saturday. Mayan EDMS took 41 minutes and more careful documentation. None of this is impossible. It is just the difference between a backup you will actually run and a backup you will postpone.

The Actual Bill

The scanner was $25. A cleaning kit was $9. Electricity for the mini PC and scanner over 60 days was about $6. Software was $0. We used an existing backup disk; if you do not have one, add $60.

Labor was the real line item. We logged 12.5 hours of setup and troubleshooting, 7 hours of admin and metadata cleanup, and 11 hours of actual scanning. That is 30.5 hours. At $30 an hour, the first 60 days cost $955, or about $0.81 per page. The scanner was 2.6% of the bill.

Ongoing, the math gets friendlier. A 10-person office that scans 10 to 15 minutes a day spends $90 to $135 a month in labor at $30 an hour, plus near-zero software cost. If you batch scan twice a week, it drops. If you scan one page at a time and then stare at the preview, it does not.

What We'd Actually Deploy

For this office, Paperless-ngx. Not because it is perfect, but because it had the least backup pain, the fastest search, and the shortest path from scanner to searchable PDF. Docspell is a close second if you like its interface and can babysit Solr. Mayan EDMS is the right answer for a document-heavy workflow with retention rules and multiple approvers. It is the wrong answer for a property manager who wants to find a lease before the tenant finishes complaining.

The $25 scanner was the easy part. The hard part was admitting that paperless is a process, not a purchase. Buy the scanner. Budget the hours. Scan in batches. Name files like an adult. And do not expect free OCR to read a sticky note taped to a receipt.

All Articles

Related Articles

The Cheap Part Was the Computer: A 45-Day Trial of Three Free CRMs

The Cheap Part Was the Computer: A 45-Day Trial of Three Free CRMs

Fifty Contracts, Three Free E-Sign Servers, and a $60 Dell: The 30-Day Invoice

Fifty Contracts, Three Free E-Sign Servers, and a $60 Dell: The 30-Day Invoice

Two Self-Hosted Password Vaults, One $60 Wyse Box, and a Dozen People Who Hate New Software

Two Self-Hosted Password Vaults, One $60 Wyse Box, and a Dozen People Who Hate New Software